Only install the rack on a solid stud, beam, masonry or concrete wall. Do not install the hanger on ‘unsupported’ wall surfaces e.g. plasterboard wall, unless there is a strong ‘wooden’ stud behind it
The rack is compatible with standard US ‘2 x 4’ (or ‘2 x ‘6) wooden studs (1.5” wide x 3.5” deep)
The rack holds wheels up to 5” (12.7cm), such as road, cyclocross, hybrid, kids, MTB and even Fat Bike
No! The hooks are dip coated with a protective material that prevents scratches
The rack will hold up to 90kg (199lb) in total, or 30kg (66.2 lb) per bike
The rack needs to be installed at least 70.9” (180cm) from the ground to allow clearance for the bikes to hang
A hammer, drill, and 0.3” (8mm) drill bit will be required.
Yes, all parts required for the assembly are provided in the box