preparing to use the pump. To install the pump head onto your shock valve: (1) Screw lower dial (silver) fully onto shock valve stem (2) Screw and tighten the top knob (red) so that the pump valve head engages the shock valve, this ensures the gauge is pressurised
The shock pump is NOT suitable to inflate bicycle tyres, it is used to put pressure in the front fork and rear shocks. The pump also helps to balance the pressure with the bleeder valve
No, but the pump is small and lightweight and easily fits in your pocket or backpack!
The shock pump is compatible with all shocks and forks that use a standard Schrader Valve
130 x 34 x 21mm / 5.1 x 1.3 x 0.8In