How to get your best bike ready for summer

CHECK OUT OUR GUIDE TO MAKING SURE IT’S RUNNING PERFECTLY!​

Some of us are lucky enough to have two bikes; a ‘best bike’ for summer, and a trusty old ‘hack’ for winter. And for those of us that only have one bike, we may be getting our beloved bike back out of storage having turned to other activities in winter.

The changing of the seasons to spring may be making you consider getting that pride and joy ‘best’ bike out of the garage and ready for action, however, just because your ‘best’ bike has been stored in the warm and dry all winter, it won’t necessarily be ready to ride straight away.

We recommend you carry out the following key checks before you unleash her into the sun:

CHAIN

If you didn’t fully clean and degrease your chain before you put the bike into storage, it may have rusted, corroded or dried up. The minimum we recommend you doing is giving the chain a wipe down with a degreaser or running it through a dedicated chain cleaning tool, and then re-lubricating it. In the worst case, the chain may be rusted, in which case it will require replacing. This is a quick and simple process that can be performed with our chain pliers and chain tool.

If you’ve been using the bike on your turbo trainer in the garage or spare room there’s also a chance that the chain has been worn as you put in all those miles on Zwift. Check the chain for wear using a chain checker. You can check out our video on how to check for chain wear below. Replace the chain if necessary.

CHAIN
CABLES
Gear and brake cables can stretch over time, and so it’s best to check this before you start riding that ‘best’ bike.

BRAKE CABLES

If you’re riding a road bike with rim brakes, there’s a chance that the cables may have become ‘sticky’. Check for this by pulling the brake lever – the brakes should engage immediately. If they feel like they’re sticking, it’s likely that the cable has either stretched, or isn’t running smoothly through the outer housing. In either case, it’s likely that a new cable will be required. It’s best to replace both the inner and outer together in this situation – that way you’re fixed for the whole of summer.

You can find out more about checking your brakes for functionality by watching the video.

GEAR CABLES

Just as your brake cables may have stretched or deteriorated over winter, your gear cables may have too. You’ll be able to tell whether this has happened by running the bike through all the gears when the bike is in a stand, or by going for a quick test spin and shifting through all the gears.

If the gears are not running smoothly – that is, they are slow and sticky when shifting through the rear cassette – they may just need re-indexing, or, more likely if your bike has been in storage a long time, a new set of cables.

First, try adjusting your barrel adjusters so as to fine-tune the shifting. This changes the tension on the cable and how much it is ‘pulling’ your derailleur. This is normally enough to fix minor misalignments. However, as with the brakes, if you’re unsure as to the state of your cables, or know that they are particularly old, we suggest you replace the cables so you’re rolling smoothly through the whole summer.

TYRES

If your bike has been in storage for several months, the tyres will definitely have deflated, as inner tubes do not hold air forever. Ensure you check the pressure in the tyres and pump them up if necessary.

If your bike has been on the turbo trainer and the front wheel has been on a stand, there is a chance that the sidewalls may have cracked. Riding a tyre with cracked sidewalls increases the chance of flat tyres. This is because the inner tube may bulge through a crack or split, and this may then either get caught by road debris and get torn and puncture, or may puncture as a result of the high pressure being placed on that one spot in the tube where it bulges through the tyre. If you spot any splits in the sidewall, change out the tyre immediately to prevent you from hassle when out on the road.

Check your nuts (on the bike that is….):

It’s always worth checking all the nuts and bolts are in good condition and secure before you ride a bike for the first time after it has been in storage. If the bike was left anywhere slightly damp, or the bike wasn’t well cleaned before putting into storage, the bolts clamping the components together may have rusted and deteriorated, or become loose.

Go over the bike, paying particular attention to the seat post clamp, stem and headset bolts. If you’ve been using your bike on a turbo trainer over winter, the headset and stem area may be particularly liable to rust, due to sweat dripping onto them.  If any of the bolts look in poor condition on initial inspection, fully remove them and check the thread for any signs of rust and wear. If they look to be past their best, replace them. It’s always useful to give any bolts you remove and then decide to keep a quick clean and grease, to protect them from rusting through the summer.

When you have assessed all the bolts for wear, and replaced any as necessary, we recommend you check they are sufficiently tight with a torque wrench. Any under-tightened bolts could work loose during a ride and this could lead to all sorts of unpleasant things. Check out our blog here why torque matters regarding the importance of torque.  For a torque wrench to cover all your maintenance needs, we recommend you invest in our flagship Torque Wrench Set.

PRO BIKE TOOL SUGGESTED READING

If you thought "How to get your best bike ready for summer" was a Here are some related articles for you.

Like this PRO BIKE TOOL article "How to get your best bike ready for summer" Why not Share it with your fellow cyclists!

Share on facebook
Share on Facebook
Share on twitter
Share on Twitter
Share on linkedin
Share on Linkedin
Share on pinterest
Share on Pinterest

C02 INFLATOR 101

Always been wondering what a CO2 inflator is, how it works, and whether it will be appropriate for you and your bike? Let us guide you through this essential cycling gadget!

Read More

Pump or CO2? What’s for you?

Should you buy a CO2 inflator or a bike pump. While either of these tools are going to be great buddies to have in your pocket or backpack on a bike ride, each one has its own benefits.

Read More

Bike Fit: Why it matters

Bike fit is an essential part of your cycling. Having your bicycle correctly set up for you will keep you injury free, comfortable, and make you stronger and faster.

Read More

Why Torque Matters

You’ve probably seen the little numbers on your stem and various other places on your bike where hex bolts are. They usually say something like ‘5 Nm’? If you don’t know what they mean or what their significance is, then you’d better keep reading.

Read More

Winter Cycling 101

Just because it’s winter there’s no need to stop riding. With a few careful choices of kit and understanding what type of riding to do, winter cycling can be a fun and rewarding experience.

Our Winter Cycling 101 is your go-to list for keeping the pedals turning this winter!

Read More

The Key Tools for Bike Maintenance

Whether you’re a beginner or a pro, there are a set of bike tools that all riders need in their bike maintenance tool kit. Essential tools for basic bike repair and maintenance that all riders will need. These will let you carry out all the key fixes and fettles that you’ll need to perform out on the road or at home.

Read More

Why You Should Cycle to Work

If you’re not a regular cyclist, then even the thought of riding your bike to work can seem daunting. However, it’s something that will improve your day – and general life – no end!

Read More

How To Fuel Your Ride

Like lots of things to do with cycling, there have been lots of words written about fuelling for longer rides. It is very easy to get confused about what are the correct carbohydrates and how many should you eat.

Read More

Essential Things to Take on Every Ride

There’s a lot of bike tools and spare parts that you can take on your bike ride. However, you don’t want to take so much that it’s excessive! So, what are the essential items that you should take on every ride that you can actually fit in your pockets or saddle bag?

Read More
0
YOUR ITEMS

WE'RE HERE TO HELP

CONTACT ON DARK

WARRANTY REGISTRATION

WARRANTY REGISTRATION
0% Complete
1 of 3

become a pro bike tool vip

VIP

WARRANTY CLAIM FORM

WARRANTY CLAIM
0% Complete
1 of 4

GET YOUR FREE GUIDE NOW

ROAD TO FIRST 100 MILER
By completing this form, you agree to receive marketing and promotional emails from PRO BIKE TOOL. You can change your preferences or unsubscribe anytime.