FAST PUMPSuper fast & reliable bicycle tire inflation
POCKET SIZESmall, compact & lightweight design to carry easily on every ride
EASY CONTROLControl lever operation regulates speed of CO2 release
TWIN VALVETwin valve head threads onto presta & schrader valves
SHOULD I STORE THE CO2 INFLATOR WITH A CARTRIDGE ATTACHED?For safety reasons, we do not recommend screwing the CO2 cartridge into the inflator head until required, in order to prevent CO2 from being dispensed while in storage.
WHAT SHOULD I DO WITH ANY RESIDUAL GAS AFTER USING THE CO2 INFLATOR?Once you have achieved your desired tire pressure, any residual gas in the cartridge should be fully emptied for safety reasons.
DO THREADLESS PRESTA VALVES WORK WITH THE CO2 INFLATOR?Most threadless presta valves have a small screw / threaded section at the very top of the valve stem, which should work with the Pro Bike Tool CO2 inflator. If you purchase the inflator and it is not compatible, send us a message and we will advise you.
IS THE CO2 INFLATOR COMPATIBLE WITH BOTH PRESTA AND SCHRADER VALVES?The CO2 inflator is compatible with both presta and schrader valves, as the force of the gas expelled from the inflator head forces the valve open.
CAN I USE THE CO2 INFLATOR ON VALVES WITH REMOVABLE CORES?Yes, but you will need to ensure that the removable element is fully screwed into the valve so that it does not become loose under the pressure of the gas and potentially waste any of the content of your cartridge.
WHAT PRESSURE WILL I ACHIEVE WITH THE CO2 INFLATOR?This depends on both the cartridge size and the type of tire. Refer to the chart below to find out what pressures can be achieved. Bear in mind that CO2 gas slowly dissipates through rubber over time. As such, you will find that the standard tire pressure will reduce slightly as the gas dissipates. We therefore recommend that you refill your tires with normal air using a conventional bike pump after your ride.
WHAT SIZE CARTRIDGES ARE COMPATIBLE WITH THE CO2 INFLATOR?The CO2 inflator head supplied with the foam sleeve fits any size of threaded CO2 cartridge (12g, 16g, 20g, 25g). However the foam sleeve included is designed to only fit over a 16g threaded CO2 cartridge.
WHY ARE SPARE O-RINGS SUPPLIED WITH MY CO2 INFLATOR?A spare o-ring is included as a replacement for both of the o-rings that are inside the inflator - the one in the nozzle that connects to the tire valve, and the one in the end that you screw the co2 cartridge into. If either of the current o-rings wear out, you may simply insert the new one.