Mini Bike Pump
PSI/BAR100 psi / 6.9 bar
fastGet back riding fast with 30% fewer pumping strokes than conventional mini bicycle air pumps.
DesignSuper compact & lightweight. Only 7.3 inches long and 3.6oz in weight so it can easily be taken with you on your bike ride.
BuildReliable & built to last.
connectionsSuper tight Presta & Schrader connection with no leaks.
SECURE BRACKETNEW secure frame mount holder with extra security strap.
Mini Bike Pump
WHERE IS THE HOSE?The hose is stored within the pump itself. You can access this by lifting the cap at the handle end of the pump and pulling out the hose within. You then screw the relevant end of the hose into the body of the pump and it is then ready to use.
HOW DO YOU INSTALL THE PUMP BRACKET ONTO THE FRAME?The frame of your bicycle will need pre-drilled holes in the frame, and there should be bolts screwed into these holes. To install the bracket, ensure the threads on the mounting bolts are clean of debris, paint and metal chips, and then put a thin film of grease on them. You then line up the bracket with the holes, and hand tighten the bolts using a screwdriver or allan key, whichever is relevant. Be careful not to cross thread the bolts!
DO THE PUMPS WORK WITH VALVES WITH REMOVABLE CORES?Yes, however you will need to ensure that the removable element is fully screwed into the valve so that it does not twist and come loose when you screw the pump hose onto the valve. If this does not work, you could also consider superglueing the core into the valve.